Recently RTL-SDR.COM reader Bert has been experimenting with our active L-band patch antenna product. He's written in to share that he's found that using it as a feed for a satellite dish works well to improve SNR on those weaker 10500 AERO signals which Bert found that he could not decode from his location due to insufficient SNR. Our active L-band patch antenna receives signals from 1525 - 1637 MHz and can be used for signals from Inmarsat, Iridium and GPS satellites.

To use the patch as a feed Bert used a 40mm drain pipe and mounted the antenna on the end of the pipe. The drain pipe fits perfectly into the LNB holder, and once mounted the distance and polarization rotation can easily be adjusted for best SNR. He also found that adding a secondary sub-reflector about 17x17cm in size helped to boost SNR by about 3-5 dB too.

Bert has tested the active L-band patch as a feed on a 65cm satellite dish and a smaller 40cm dish, both with good results.

Over on his YouTube channel Tech Minds has uploaded a video showing how it's possible to receive and decode GPS signals with an RTL-SDR. To do this he uses one of our RTL-SDR Blog V3 dongles and a GPS patch antenna which is powered via the bias tee on the dongle.

On the software side he uses GNSS-SDRLIB and RTKLIB to decode the GPS signal. The result of the two programs is your current GPS coordinates which can be plotted on a map. Unfortunately in the video Tech Minds was unable to get the Google Maps display to work, but you can easily type the coordinates into Google maps yourself.

Just a quite note to say that the second batch of our Active L-Band Patch Antenna for receiving Inmarsat, Iridium and other L-Band satellites is now in stock, available to be shipped from our warehouse in China from early next week. Amazon will be stocked within the next 1-2 months as the freighter will take time to arrive.

Please see our store for ordering details.

Pricing remains the same at US$49.95 including free worldwide shipping to most countries. A reminder to EU customers: please order from our Aliexpress or eBay stores as due to the new IOSS laws we need to now use those marketplaces to collect and remit VAT upon your purchase, instead of upon import at the border.

This second batch comes in a gray color as feedback from the previous batch indicated that a lighter color is preferred to avoid excess heating from the sun.

If you are hearing about this patch antenna for the first time, please see our original release post for more information. In short this is an amplified patch antenna designed to be used with bias tee capable SDRs that can provide 3.3V - 5V power, such as our RTL-SDR Blog V3 dongle, Airspy, SDRplay or HackRF.

The antenna allows for reception of L-band satellites that transmit between 1525 - 1660 MHz, such as Inmarsat, Iridium and GPS. Please note it is *not* for receiving weaker signals like HRPT and GOES which require a dish antenna.

The patch comes with useful mounting accessories including a window suction cup, bendable tripod and 3M RG174 coax cable. The patch and active circuitry is enclosed in a weather proof enclosure.

What can you do with this antenna?

• Inmarsat STD-C EGC
• AERO Satellite ACARS
• AERO C-Channel Voice
• Iridium Decoding
• GPS and GNSS Experiments

Sarah from the SignalsEverywhere YouTube channel is back this week with a video review and demonstration of our RTL-SDR Blog Active L-Band patch antenna, which is designed for receiving Inmarsat and Iridium satellites between 1525 - 1660 MHz with an RTL-SDR or other bias tee capable SDR.

In the video Sarah demonstrates the patch antenna in action running in SDR++, discusses some of the features and compares it against another patch antenna. She goes on to briefly show JAERO receiving and decoding an 8400bps AERO voice channel.

If you're interested, this antenna has also been reviewed by Frugal Radio, Tech Minds, and Mike from SDRplay. 

The patch is currently in stock in our store for $49.95 shipped worldwide, or on Amazon USA for US customers. We note that previous problems (as explained in our earlier post) with cracks in the plastic in the latest batch with grey enclosures have been resolved now, and units shipping now are without defect.

What can you do with this antenna?

• Inmarsat STD-C EGC
• AERO Satellite ACARS
• AERO C-Channel Voice
• Iridium Decoding
• GPS and GNSS Experiments

Over on his blog Nils Schiffhauer (DK8OK) has recently uploaded a review of our RTL-SDR Blog Active L-Band Patch Antenna. This is a satellite patch antenna designed for experimenters who want to receive Inmarsat, Iridium, GPS and other GNSS signals. It covers 1525 - 1660 MHz. (Please note it does not cover GOES or other L-band weather satellites as these are much weaker signals that require a dish). The antenna comes as a set with mounting hardware and extension cable and can be purchased on our store for $49.95 including free worldwide shipping to most countries.

In his review Nils tests the patch antenna with his wideband BladeRF software defined radio showing a wide 60 MHz of bandwidth being received. He then goes on to show it being used to receive AERO, via the JAERO decoder, and STD-C via the Tekmanoid decoder.

We want to take this opportunity to pre-announce that due to rising shipping costs the price of this antenna set will be going up by $10 in early 2022. Before the price raise we will put out another post, but if you are interested in one we'd recommend picking one up soon.

Websites like adsbexchange.com log ADS-B aircraft tracking data from contributors located all over the world and aggregate it all onto a single map. Typically an RTL-SDR is the receiver of choice for contributors receiving ADS-B signals. One piece of data that is recorded with each packet is GPS/GNSS accuracy.

Over on Twitter John Wiseman @lemonodor has been using the aggregated ADS-B data provided by adsbexchange to highlight regions where ADS-B GPS inaccuracies are significant. This may allow us to use crowd sourced data to detect regions of GPS interference or jamming. In one of his latest findings he noted extreme GPS inaccuracy that noticed around the Baltic regions (Poland, Lithuania, Latvia, Kaliningrad).

As John and others reported in subsequent Tweets, this GPS interference was noticed by others too, with some flights needing to be cancelled or needing to return during their journey, and a NOTAM warning being issued to pilots regarding the interference. Reuters also reported on the GPS disturbance a few days later.

NOTAM: GPS INTERFERENCE DETECTED IN THE EASTERN PARTS OF HELSINKI FIR. AFFECTED AREA SECTOR N, SFC-FL200

It is well known that Russia routinely utilizes GPS spoofing or jamming around Kremlin landmarks, sensitive areas and during military operations. However, others noted that NATO exercises in the Baltic could also be the cause.

To further add to this story, the satellite intelligence operator Hawkeye 360 also recently detected significant GPS interference within or around Ukraine.

Over on dereksgc's YouTube channel we've discovered a few more recent interesting videos from his satellite decoding series that people may be interested in. One from two weeks ago shows how it's possible to receive voice transmissions on navigation satellites such as GPS.

Many navigational and meteorological satellites carry a search and rescue (SAR) repeater which is intended to receive UHF emergency locator beacons and rebroadcast them in the L-band or higher. However the repeaters appear to be picking up all sorts of other signals from the ground, including voice transmissions. Dereksgc notes that the theory is that there are some land based communications systems in some countries that are sharing frequencies that emergency locator beacons use, or that malicious pirates may be actively using these SAR repeaters for their own communications.

Dereksgc shows examples of retransmitted signals on the Beidou, GLONASS and Elektro-L satellite downlinks at 1.5442 GHz and at 2.226 MHz for the GPS satellites. He also shows what sort of satellite dish and feed setup you need. In the video he uses a HackRF as the SDR, but you could also use an RTL-SDR for the satellites that transmit at 1.5442 GHz.

Over on his YouTube channel Aaron who created and maintains the DragonOS SDR Linux distribution, has uploaded a video demonstrating how to use the GNSS-SDR software together with an RTL-SDR and patch antenna to obtain a live GPS position.

Previously we had only seen a Windows method involving GNSS-SDRLIB and RTKNAVI working as GNSS-SDR on Linux seemed impossible to get running. However, Aaron managed to find a working RTL-SDR configuration for GNSS-SDR which made it come alive. This is great as now GNSS-SDR should be able to run on a portable single board computer like a Raspberry Pi.

The video is a tutorial that shows how to install all the required dependencies, how to compile GNSS-SDR, how to configure it for an RTL-SDR, and how to use it with our RTL-SDR Blog L-band patch antenna.

Thank you to RTL-SDR.COM reader Lee. who found a recently released program called "gypsum" which enables an RTL-SDR or HackRF to be used as a GPS Receiver when combined with a GPS antenna. Phillip Tennen, the author of Gypsum notes that Gypsum can obtain a fix within 60 seconds from a cold start and that it has no dependencies apart from numpy. We want to note that it appears that Gpysum has no live decoding ability yet, as it works from pre-recorded GNU Radio IQ files.

In the past, we've shown in a tutorial how GPS can be received and decoded with GNSS-SDRLIB and RTKLIB on Windows. The new Gypsum software should work on Linux and MacOS too.

What's more, Phillip has written an incredible 4-part writeup on how Gypsum was implemented from scratch. In the write-up, Phillip introduces GPS and explains how it can even work with such weak signals that appear below the thermal noise floor. He then goes on to explain how the detected signal is decoded and turned into positional information, and how challenging it was to propagate the accurate timing information that calculating a solution requires. The write-up is presented with clear visualizations to help readers intuitively gain an understanding of the advanced concepts involved.

In recent years GPS spoofing and jamming have become quite commonplace. Recently popular YouTuber Scott Manley uploaded a video explaining exactly what GPS spoofing and jamming is and explains a bit about who is doing it and why.

In the video Scott explains how aircraft now routinely use GPS as a dominant navigational sensor and how some commercial flights have been suspended due to GPS jamming. Scott explains how ADS-B data can be used to determine the source of GPS jamming (via gpsjam.org) and shows hotspots stemming from Russia. He goes on to show how drone shows have also failed in China either due to GPS jamming by rival companies or due to Chinese military warship jamming. Scott then explains a bit about GPS and how jamming and spoofing work.